Question 1

Items should never be section lined, even though the cutting plane passes through what objects? _____________________________.

Accepted Answer

Ribs, webs...

Question 2

The section view that is usually limited to symmetrical objects is the ________________.

Accepted Answer

The answer of The section view that is usually limited...

Question 3

The cutting plane line and arrowheads are drawn thin, like the centerline.

Accepted Answer

A) True 
 B)False

Question 4

All visible edges and contours behind the cutting plane should be shown.

Accepted Answer

A) True 
 B)False

Question 5

All of the following are elements of section views except:

Accepted Answer

A)   Cutting plane line
B)   Hidden lines
C)   Arrowheads
D)   Section lines
E)   Letter identifiers, such as A-AF) A) and B)
G) B) and C)

Question 6

When section lines are drawn, the space between cross-hatch lines should be approximately ________.

Accepted Answer

The answer of When section lines are drawn, the space...

Question 7

The section view that does not use a cutting plane line and is limited by a break line is called a ___________________.

Accepted Answer

Broken-out section

Question 8

A break used on cylindrical shafts or tubes are referred to as _______________.

Accepted Answer

The answer of A break used on cylindrical shafts or...

Question 9

All the following statements regarding sectional views is correct except:

Accepted Answer

A)   All visible edges and contours behind the cutting plane should be shown.
B)   The type of cutting plane symbol you use depends on the type of sectional view to be shown.
C)   Each section is completely independent of the other and drawn as if the other were not present.
D)   Hidden lines are omitted in sectional views.
E)   The arrows on a cutting plane indicate the viewing direction.F) A) and B)
G) A) and C)

Question 10

Which of the following statements is true regarding sectional views?

Accepted Answer

A)   Thin features should not be section lined.
B)   Offsets in the cutting plane are always at 90° and should always be shown in the sectional view.
C)   Section lines are drawn thick and approximately 3/32" apart.
D)   Dimensioning lines frequently cross section lines.
E)   Section lines should be spaced proportional to the feature they are hatching.F) A) and B)
G) A) and C) A

Question 11

Which of the following sectional views does not require a cutting plane line?

Accepted Answer

A)   Half section view
B)   Full sections
C)   Broken-out sectional view
D)   Aligned sectional view
E)   Removed sectionF) B) and C)
G) C) and E)

Question 12

Typically circular objects are drawn using half sections where required.

Accepted Answer

A) True 
 B)False

Question 13

In the final drawing, cutting plane lines should be drawn thick.

Accepted Answer

A) True 
 B)False

Question 14

A view in which the cutting plane is bent passing though selected features of the object and then removed to be on the original plane is a:

Accepted Answer

A)   Half section view
B)   Revolved section view
C)   Removed section view
D)   Aligned section view
E)   Full section viewF) A) and E)
G) C) and D)

Question 15

A cutting plane line that is not straight and is offset or bending through the object is typically of a _________________ section.

Accepted Answer

Offset

Question 16

Where mating surfaces meet in assembly drawings, no change is indicated in the section lines.

Accepted Answer

A) True 
 B)False

Exam 8: Section Views

Items should never be section lined, even though the cutting plane passes through what objects? _____________________________.

Correct Answer
verified
Ribs, webs...
View Answer

The section view that is usually limited to symmetrical objects is the ________________.

Correct Answer
verified

The cutting plane line and arrowheads are drawn thin, like the centerline.

Correct Answer
verified

All visible edges and contours behind the cutting plane should be shown.

Correct Answer
verified

All of the following are elements of section views except:

Correct Answer
verified

When section lines are drawn, the space between cross-hatch lines should be approximately ________.

Correct Answer
verified

The section view that does not use a cutting plane line and is limited by a break line is called a ___________________.

Correct Answer
verified
Broken-out section

A break used on cylindrical shafts or tubes are referred to as _______________.

Correct Answer
verified

All the following statements regarding sectional views is correct except:

Correct Answer
verified

Which of the following statements is true regarding sectional views?

Correct Answer
verified
A

Which of the following sectional views does not require a cutting plane line?

Correct Answer
verified

Typically circular objects are drawn using half sections where required.

Correct Answer
verified

In the final drawing, cutting plane lines should be drawn thick.

Correct Answer
verified

A view in which the cutting plane is bent passing though selected features of the object and then removed to be on the original plane is a:

Correct Answer
verified

A cutting plane line that is not straight and is offset or bending through the object is typically of a _________________ section.

Correct Answer
verified
Offset

Where mating surfaces meet in assembly drawings, no change is indicated in the section lines.

Correct Answer
verified

Exam 8: Section Views

Items should never be section lined, even though the cutting plane passes through what objects? _____________________________.

Correct AnswerverifiedRibs, webs...View AnswerShow Answer

The section view that is usually limited to symmetrical objects is the ________________.

Correct AnswerverifiedShow Answer

The cutting plane line and arrowheads are drawn thin, like the centerline.

Correct AnswerverifiedShow Answer

All visible edges and contours behind the cutting plane should be shown.

Correct AnswerverifiedShow Answer

All of the following are elements of section views except:

Correct AnswerverifiedShow Answer

When section lines are drawn, the space between cross-hatch lines should be approximately ________.

Correct AnswerverifiedShow Answer

The section view that does not use a cutting plane line and is limited by a break line is called a ___________________.

Correct AnswerverifiedBroken-out section

A break used on cylindrical shafts or tubes are referred to as _______________.

Correct AnswerverifiedShow Answer

All the following statements regarding sectional views is correct except:

Correct AnswerverifiedShow Answer

Which of the following statements is true regarding sectional views?

Correct AnswerverifiedA

Which of the following sectional views does not require a cutting plane line?

Correct AnswerverifiedShow Answer

Typically circular objects are drawn using half sections where required.

Correct AnswerverifiedShow Answer

In the final drawing, cutting plane lines should be drawn thick.

Correct AnswerverifiedShow Answer

A view in which the cutting plane is bent passing though selected features of the object and then removed to be on the original plane is a:

Correct AnswerverifiedShow Answer

A cutting plane line that is not straight and is offset or bending through the object is typically of a _________________ section.

Correct AnswerverifiedOffset

Where mating surfaces meet in assembly drawings, no change is indicated in the section lines.

Correct AnswerverifiedShow Answer

Correct Answer
verified
Ribs, webs...
View Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
Broken-out section

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
A

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
Offset

Correct Answer
verified