Question 1

In an error code,e.g., 16#0106, the 16# signifies that the radix of the error code is octal.

Accepted Answer

A) True 
 B)False

Question 2

In setting up a module's properties, the time period entry for output information to be sent from the output tags to this output module is known as the ____________________.

Accepted Answer

requested packet int...

Question 3

Inhibiting a module is typically used during startups or ____________________.

Accepted Answer

The answer of Inhibiting a module is typically used during...

Question 4

Briefly explain what occurs when a project is downloaded into the controller and the controller is put into Run mode.

Accepted Answer

When a project is downloaded into the co...

Question 5

What are four general options for setting up ownership in the I/O configuration?

Accepted Answer

The options for setting up ownership in the I/O configuration include:
1. This controller has the module in its I/O configuration. This controller is the owner.
2. This controller has the module in its I/O configuration. This controller is not the owner and has a listen only connection.
3. This controller has the module in its I/O configuration, and the module is inhibited in the I/O configuration.
4. This controller does not have the module in the I/O configuration.

Question 6

Using RSLogix 5000 software, why is configuring I/O modules a manual process rather than having a "read I/O configuration feature" as found in RSLogix 500 software?

Accepted Answer

Because there are many options when configuring I/O modules, the process is manual so as to provide programming individuals the opportunity to configure their systems to their exact specifications.

Question 7

The conversion of the analog incoming signal to the initial value stored in the module is called the ____________________ data.

Accepted Answer

The answer of The conversion of the analog incoming signal...

Question 8

Until the modules are configured, no I/O tags are available in the monitor or edit tags views of the controller scoped tags collection.

Accepted Answer

A) True 
 B)False

Question 9

____________________ output modules have the ability to determine the actual state of the output point when the point is commanded to be on.

Accepted Answer

The answer of ____________________ output modules have the ability to...

Question 10

When an integer format is selected, scaling of the outputs is not configurable in the I/O configuration.

Accepted Answer

A) True 
 B)False

Question 11

Latch diagnostics can be cleared directly using a ladder logic clear instruction.

Accepted Answer

A) True 
 B)False

Question 12

When selecting electronic keying, a user needs to determine how closely matched a module replacement must be to the original part number, manufacturer, and major and minor revision. What are the three choices?

Accepted Answer

There are three choi...

Question 13

An output module may have multiple owners, whereas an input module can only have one owner.

Accepted Answer

A) True 
 B)False

Question 14

When beginning the I/O configuration process, what are three methods for selecting the module in the Select Module window?

Accepted Answer

First, you can select the module type from the By Category tab.
Second, you can select the By Vendor tab to select by manufacturer.
The third option is to select the module using the Favorites tab.

Question 15

The ____________________ controller holds the I/O configuration for each module it owns.

Accepted Answer

The answer of The ____________________ controller holds the I/O configuration...

Exam 6: Modular Controllogix Digital and Analog I-O Configuration

In an error code,e.g., 16#0106, the 16# signifies that the radix of the error code is octal.

Correct Answer
verified

In setting up a module's properties, the time period entry for output information to be sent from the output tags to this output module is known as the ____________________.

Correct Answer
verified
requested packet int...
View Answer

Inhibiting a module is typically used during startups or ____________________.

Correct Answer
verified

Briefly explain what occurs when a project is downloaded into the controller and the controller is put into Run mode.

Correct Answer
verified
When a project is downloaded into the co...
View Answer

What are four general options for setting up ownership in the I/O configuration?

Using RSLogix 5000 software, why is configuring I/O modules a manual process rather than having a "read I/O configuration feature" as found in RSLogix 500 software?

Correct Answer
verified
Because there are many options when configuring I/O modules, the process is manual so as to provide programming individuals the opportunity to configure their systems to their exact specifications.

The conversion of the analog incoming signal to the initial value stored in the module is called the ____________________ data.

Correct Answer
verified

Until the modules are configured, no I/O tags are available in the monitor or edit tags views of the controller scoped tags collection.

Correct Answer
verified

____________________ output modules have the ability to determine the actual state of the output point when the point is commanded to be on.

Correct Answer
verified

When an integer format is selected, scaling of the outputs is not configurable in the I/O configuration.

Correct Answer
verified

Latch diagnostics can be cleared directly using a ladder logic clear instruction.

Correct Answer
verified

When selecting electronic keying, a user needs to determine how closely matched a module replacement must be to the original part number, manufacturer, and major and minor revision. What are the three choices?

Correct Answer
verified
There are three choi...
View Answer

An output module may have multiple owners, whereas an input module can only have one owner.

Correct Answer
verified

When beginning the I/O configuration process, what are three methods for selecting the module in the Select Module window?

Correct Answer
verified
First, you can select the module type from the By Category tab. Second, you can select the By Vendor tab to select by manufacturer. The third option is to select the module using the Favorites tab.

The ____________________ controller holds the I/O configuration for each module it owns.

Correct Answer
verified

Exam 6: Modular Controllogix Digital and Analog I-O Configuration

In an error code,e.g., 16#0106, the 16# signifies that the radix of the error code is octal.

Correct AnswerverifiedShow Answer

In setting up a module's properties, the time period entry for output information to be sent from the output tags to this output module is known as the ____________________.

Correct Answerverifiedrequested packet int...View AnswerShow Answer

Inhibiting a module is typically used during startups or ____________________.

Correct AnswerverifiedShow Answer

Briefly explain what occurs when a project is downloaded into the controller and the controller is put into Run mode.

Correct AnswerverifiedWhen a project is downloaded into the co...View AnswerShow Answer

What are four general options for setting up ownership in the I/O configuration?

Using RSLogix 5000 software, why is configuring I/O modules a manual process rather than having a "read I/O configuration feature" as found in RSLogix 500 software?

Correct AnswerverifiedBecause there are many options when configuring I/O modules, the process is manual so as to provide programming individuals the opportunity to configure their systems to their exact specifications.

The conversion of the analog incoming signal to the initial value stored in the module is called the ____________________ data.

Correct AnswerverifiedShow Answer

Until the modules are configured, no I/O tags are available in the monitor or edit tags views of the controller scoped tags collection.

Correct AnswerverifiedShow Answer

____________________ output modules have the ability to determine the actual state of the output point when the point is commanded to be on.

Correct AnswerverifiedShow Answer

When an integer format is selected, scaling of the outputs is not configurable in the I/O configuration.

Correct AnswerverifiedShow Answer

Latch diagnostics can be cleared directly using a ladder logic clear instruction.

Correct AnswerverifiedShow Answer

When selecting electronic keying, a user needs to determine how closely matched a module replacement must be to the original part number, manufacturer, and major and minor revision. What are the three choices?

Correct AnswerverifiedThere are three choi...View AnswerShow Answer

An output module may have multiple owners, whereas an input module can only have one owner.

Correct AnswerverifiedShow Answer

When beginning the I/O configuration process, what are three methods for selecting the module in the Select Module window?

Correct AnswerverifiedFirst, you can select the module type from the By Category tab. Second, you can select the By Vendor tab to select by manufacturer. The third option is to select the module using the Favorites tab.

The ____________________ controller holds the I/O configuration for each module it owns.

Correct AnswerverifiedShow Answer

Correct Answer
verified

Correct Answer
verified
requested packet int...
View Answer

Correct Answer
verified

Correct Answer
verified
When a project is downloaded into the co...
View Answer

Correct Answer
verified
Because there are many options when configuring I/O modules, the process is manual so as to provide programming individuals the opportunity to configure their systems to their exact specifications.

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
There are three choi...
View Answer

Correct Answer
verified

Correct Answer
verified
First, you can select the module type from the By Category tab. Second, you can select the By Vendor tab to select by manufacturer. The third option is to select the module using the Favorites tab.

Correct Answer
verified