Filters
Question type
Study Flashcards

Which of the following best characterizes areas in the OSPF protocol?


A) Not used
B) Used to partition a large network into small networks
C) Used to combine small networks into one large network
D) An inefficient use of bandwidth

E) B) and C)
F) B) and D)

Correct Answer

verifed

verified

All subnets that are attached to Router2 for the network shown in the following figure are: 10.20.100.0 10.50.10.0 All subnets that are attached to Router2 for the network shown in the following figure are: 10.20.100.0 10.50.10.0

A) True
B) False

Correct Answer

verifed

verified

What mode are you in when you use the network command to configure OSPF?


A) (config)
B) (config-if)
C) (config-router)
D) (config-ospf)

E) None of the above
F) C) and D)

Correct Answer

verifed

verified

Which of the following router commands could be used to display the routing protocol configured on the router?


A) router>sh ip protocol detail
B) router# sh ip protocol
C) router# sh protocol
D) All of these answers are correct

E) None of the above
F) All of the above

Correct Answer

verifed

verified

What is the administrative distance for a static route in Cisco networking?


A) 1
B) 0
C) 10
D) 20

E) A) and B)
F) B) and C)

Correct Answer

verifed

verified

A

What is the administrative distance of a static route?


A) 110
B) 120
C) 1
D) 90
E) 100

F) B) and E)
G) A) and B)

Correct Answer

verifed

verified

C

What is the administrative distance for OSPF in Cisco networking?


A) 10
B) 90
C) 110
D) 120

E) All of the above
F) A) and B)

Correct Answer

verifed

verified

What is the administrative distance for RIP in Cisco networking?


A) 10
B) 90
C) 110
D) 120

E) None of the above
F) All of the above

Correct Answer

verifed

verified

D

Advertising a network means the routing table containing the network is shared with its neighbor routers.

A) True
B) False

Correct Answer

verifed

verified

What is the administrative distance for EIGRP in Cisco networking?


A) 10
B) 90
C) 110
D) 120

E) All of the above
F) B) and C)

Correct Answer

verifed

verified

What is the number 10 in the command router ospf 10?


A) Tag
B) Process ID
C) AS number
D) Metric

E) B) and C)
F) All of the above

Correct Answer

verifed

verified

Which prompt is displayed after issuing the command to enable RIP routing?


A) router(config-router-rip) #
B) router(config-router)
C) router#(config-router)
D) router(config-router) #
E) router#(config-router-rip)

F) A) and C)
G) A) and E)

Correct Answer

verifed

verified

Which of the following best characterizes OSPF's Area 0?


A) Used to hide data packets
B) Root or the backbone for the network
C) Inverse mask bits
D) Route selection bits

E) All of the above
F) B) and C)

Correct Answer

verifed

verified

Select the command that can be used to route a data packet route out of your current LAN if a route to the specified destination has not been entered into the router's routing table.The destination IP address is 192.168.12.3.The subnet mask being used for the LAN is /26.The next hop IP address is 192.168.12.66.


A) router(config) # ip route 0.0.0.0 0.0.0.0 192.168.12.66
B) router(config) # ip route 192.168.12.66 0.0.0.0 0.0.0.0
C) router>ip route 0.0.0.0 0.0.0.0 192.168.12.66
D) router>ip route 192.168.12.66 0.0.0.0 0.0.0.0

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

You want to configure EIGRP on five interfaces all in the 10.X.X.X network range using a single command.What command does this?


A) network 10.0.0.0
B) network 10.0.0.0 255.0.0.0
C) network 10.0.0.0 0.255.255.255 area 0
D) network 10.0.0.0 mask 255.0.0.0

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

What is the administrative distance for a directly connected route in Cisco networking?


A) 1
B) 0
C) 10
D) 20

E) None of the above
F) A) and C)

Correct Answer

verifed

verified

What is the purpose of variable length subnet masks?


A) They are not recommended in modern computer networks.
B) They minimize wasted IP address space when interconnecting subnets.
C) They reduce the number of bits required in a subnet mask from 32 to 24.
D) They are the same as classful addressing.

E) A) and B)
F) C) and D)

Correct Answer

verifed

verified

Which of the following does the OSPF routing protocol use to verify that a link between to routers is active and the routers are communicating?


A) LSAs
B) ARP messages
C) Ping
D) "Hello" packets

E) B) and C)
F) A) and B)

Correct Answer

verifed

verified

What command will provide information about the dynamic routing protocols on your Cisco router and their configurations?


A) show protocol
B) show ip protocol
C) show protocol dynamic
D) show protocol link-state

E) C) and D)
F) B) and D)

Correct Answer

verifed

verified

A computer with an IP address of 10.10.5.1 sends a data packet with a destination IP address of 10.5.10.20 using a subnet mask of 255.255.255.0.The packet stays in the LAN.

A) True
B) False

Correct Answer

verifed

verified

Showing 1 - 20 of 38

Related Exams

Exam 1

Introduction to Computer Networks

20 Questions

Exam 2

Physical Layer Cabling: Twisted Pair

18 Questions

Exam 3

Physical Layer Cabling: Fiber Optics

16 Questions

Exam 4

Wireless Networking

34 Questions

Exam 5

Interconnecting the Lans

13 Questions

Exam 6

Tcp/Ip

15 Questions

Exam 7

Introduction to Router Configuration

18 Questions

Exam 8

Introduction to Switch Configuration

6 Questions

Exam 10

Internet Technologies: Out to the Internet

18 Questions

Exam 11

Troubleshooting

28 Questions

Exam 12

Network Security

22 Questions

Exam 13

Cloud Computing and Virtualization

10 Questions

Exam 14

Codes and Standards

16 Questions

Show Answer